Don't miss an issue! Renew/subscribe for FREE today.
×

Fighting Cavities Could One Day Be as Easy as Taking a Pill, Research Shows

Posted on Friday, March 11, 2016

University of Florida Health researchers have identified a new strain of bacteria in the mouth that may keep bad bacteria in check — and could lead to a way to prevent cavities using probiotics.

The researchers say the findings could lead to the development of a supplement that patients could take orally to prevent cavities.

While developing an effective oral probiotic will require more research, a possible candidate organism has been identified: a previously unidentified strain of Streptococcus, currently called A12. Robert Burne, Ph.D., associate dean for research and chair of the UF College of Dentistry's department of oral biology, andMarcelle Nascimento, D.D.S., Ph.D., an associate professor in the UF College of Dentistry's department of restorative dental sciences, published the findings in late January in the journal Applied and Environmental Microbiology.

To maintain a healthy mouth, the oral environment must have a relatively neutral chemical makeup, or a neutral pH. When the environment in the mouth becomes more acidic, dental cavities or other disorders can develop, according to Burne.

"At that point, bacteria on the teeth make acid and acid dissolves the teeth. It's straightforward chemistry," Burne said. "We got interested in what activities keep the pH elevated."

Previous research by Burne, Nascimento and others found two main compounds that are broken down into ammonia, which helps neutralize acid in the mouth. These compounds are urea, which everyone secretes in the mouth, and arginine, an amino acid. Burne and Nascimento had also previously found that both adults and children with few or no cavities were better at breaking down arginine than people with cavities. Researchers knew bacteria were responsible for breaking down these compounds but needed to investigate which bacteria do this best, and how this inhibits cavities. Part of the answer is A12.

"Like a probiotic approach to the gut to promote health, what if a probiotic formulation could be developed from natural beneficial bacteria from humans who had a very high capacity to break down arginine?" said Burne. "You would implant this probiotic in a healthy child or adult who might be at risk for developing cavities. However many times you have to do that — once in a lifetime or once a week, the idea is that you could prevent a decline in oral health by populating the patient with natural beneficial organisms."

A12 has a potent ability to battle a particularly harmful kind of streptococcal bacteria called Streptococcus mutans, which metabolizes sugar into lactic acid, contributing to acidic conditions in the mouth that form cavities. The UF researchers found that A12 not only helps neutralize acid by metabolizing arginine in the mouth, it also often kills Streptococcus mutans.

"Also, if A12 doesn't kill Streptococcus mutans, A12 interferes with Streptococcus mutans' ability to carry out its normal processes that it needs to cause disease," Burne said. "If you grow them together, Streptococcus mutans does not grow very well or make biofilms, also known as dental plaque, properly."

Nascimento, a clinician, collected plaque samples for the study. Dental plaque is a mass of bacteria that grows on the surface of teeth and can contribute to the formation of cavities. She isolated more than 2,000 bacteria that the researchers then screened to find bacteria that fit the bill.

"We then characterized 54 bacteria that metabolized arginine," Nascimento said. "Out of these, A12 stood out for having all of the properties we were looking for in a bacteria strain that could prevent cavities in a probiotic application."

The researchers sequenced the entire genome of A12 and plan to turn this discovery into a tool to screen for people who are at a higher risk for developing cavities, in combination with other factors such as a patient's diet and their oral hygiene habits.

"We may be able to use this as a risk assessment tool," Nascimento said. "If we get to the point where we can confirm that people who have more of this healthy type of bacteria in the mouth are at lower risk of cavities, compared to those who don't carry the beneficial bacteria and may be at high risk, this could be one of the factors that you measure for cavities risk."

Next, the researchers hope to find more instances of A12 in a larger sample of people and to test how prevalent bacteria with similar properties are in the human mouth. Burne and his research team of Nascimento, David Culp, Ph.D., in UF's department of oral biology, and Vincent Richards, Ph.D., an assistant professor at Clemson University, received a five-year, $3 million grant from the National Institutes of Health's National Institute of Dental and Craniofacial Research. The grant, under award R01DE025832, will allow researchers to study the genomics and ecology of A12 and related bacteria in the oral cavity and examine the mechanisms used by beneficial bacteria to promote oral health.

Source: University of Florida Health News Room







Henry Schein Graduates 17 Dental Practice Owners From Company’s First Business Institute

Posted on Friday, March 11, 2016

MELVILLE, N.Y., March 10, 2016 – Henry Schein, Inc. (NASDAQ: HSIC), the world's largest provider of health care products and services to office-based dental, animal health and medical practitioners, recently ‘graduated’ the first class of its Henry Schein Dental Business Institute, which was designed to teach dental practice owners and operators business fundamentals. The company worked with a simulation developer, Sim Studios, to create real-life situations that the 17 graduates could apply in their dental practice to help them operate a more productive and efficient business.

Launched in March 2015, The Henry Schein Dental Business Institute was designed for dental practice owners in the early stages of group practice development who wanted to expand the size of their enterprise, or enhance their management skills in the areas of HR, marketing, finance and operations.  Education was delivered by industry leaders who provided tools and resources for growing dental practices to compete in a new environment.

“At Henry Schein, we believe in providing practitioners with the tools they need to operate a productive and efficient business so they can focus on delivering the best quality patient care,” said Eric Nuss, Director, Henry Schein Business Solutions and the Henry Schein Dental Business Institute. “This concept is the cornerstone of the Business Institute. We created a program to meet the business needs of dentists that provides the coaching and training to help dentists identify and implement effective strategies to grow their practice. Thanks to program partner Sim Studios we were also able to offer real-world business simulations that gave students a concept to literally play with. We had Legos and a box of toys in the middle of a table to help stimulate thought and action around the building blocks of their business and at the core, to always have fun. This approach to learning how to solve business problems in the dental office challenges the orthodoxy of traditional business education. And that is our goal.”

The first day involved expert-led interactive workshops by Jameson Management that aided in the development of mission, vision and purpose statements, followed by communications expert Katherine Eitel, training each practice owner how to communicate their mission, vision and purpose to their dental teams. The next day, participants received coaching from a founding member of the Academy of Dental Certified Public Accountants (ADCPA), Bob Gray, who helped with the development of a business plan. Sim Studios also provided a competitive business simulation predicting the outcomes of more than 150 different business decisions.

“The Dental Business Institute is a great example of how practices can utilize the power of custom business simulations to provide innovative training that has a real, lasting impact on the bottom line,” said William Hall, Vice President of Learning and Development, Sim Studios. “Participants who experienced the simulations get as close to a real-world experience one could receive.”

During the business simulations, practitioners considered the current state of their practice, and developed a roadmap of how they can take their practice to the next level. First, they asked themselves, "who am I going to employ," "how will I attract and retain patients," "what investments will I make." Second, they asked themselves, "which practices will I consider adding to my portfolio," "how will I develop the infrastructure?" The third simulation is all about delegation and leadership. Here they were asked, "how can you expand, yet stay true to the original mission once you have added more practices?"

“There were many topics covered that we deal with every day in the real-world,” Ali Zareh, Parkview Dental (Riverside, CA). “I have already implemented many of the concepts learned and will continue to do so.”

“The speakers were top-notch; both engaging and informative,” said Shanna McGettrick, Hi Tech Family Dentistry, (Southfield, MI).  "During each course I recorded a checklist of ideas to implement when I returned to the office.”

“The program was more than enlightening. It opened my mind about a lot of things that I had not thought of before,” said Abdul Hasui, Oakman Family Dentistry (Dearborn, MI). “Thank you Eric Nuss and Team Schein for doing an excellent job creating the Institute.”

Participants gained practical experience in business and public speaking skills, and learned how to develop business plans.

To learn more about the Henry Schein Dental Business Institute, please visit www.henryscheindental.com/DentalBusinessInstitute.







Strategy Announces PFM Substructures

Posted on Thursday, March 10, 2016

CEO Scott Mappin Announces Another

First-to-Market Offering from Strategy Milling©:

Milled Noble Porcelain-Fused-to-Metal (PFM) Substructures

Pittsburgh, PA – Strategy Milling©’s new CEO Scott Mappin officially announced today the availability of (Noble or Precious) Porcelain-Fused-to-Metal (PFM) substructures. Strategy continues its first-to-market contributions with the new PFM substructures while maintaining its status of being the only resource available for milled precious metals.

“We reached the last stage of our PFM testing in March and are fully confident in offering this outstanding new product to the market,” remarked Scott Mappin, CEO, Strategy Milling. “We have received nothing but extremely positive feedback from laboratories on the quality of our PFM frames, and know of no other establishment that provides this type of service in North America. We are truly pleased to offer the finest PFM frames in the industry.”

The same milling strategy employed to produce superior fits on Strategy’s classic full-contour milled gold prosthetics is also used on the PFM substructures. Current Strategy Milling customers are not required to change parameters, and the outer surface finish takes minimal time and effort to complete once the PFM is returned. Laboratory professionals simply remove the connectors and then perform a light surface finish. This efficient process greatly reduces the overall steps, time, materials, and cost of traditional casting, CAD-CAST, or SLM workflows.

March 2016 marks Strategy Milling’s fourth year of producing direct milled precious metal prosthetics for the dental laboratory industry. According to Mappin, “Milling is one of the most precise ways to produce premium products. By employing our proprietary process to manufacturea blank puck of dental alloy, we are able to consistently provide pristine products with virtually no porosity, and ideal grain structure, density, and hardness.”   

In the short time since its introduction, Strategy Milling has achieved widespread acceptance in the dental laboratory market sector while meeting dental professional and patient demands for strong, reliable precious metal born restorations. “When we first introduced Strategy Milling, it was our solution to the conundrum of dental laboratories who found that providing high-quality gold restorations wassimply not feasible for business,” continued Mappin. “Because our initial services were so well received, we are now looking to develop even more solutions such as the new PFMs. We will continue to explore what laboratories are in need of and, in turn, happily provide ongoing support. It’s very satisfying to be looked at as a true partner in their professional success.”

For more information about Strategy Milling PFMs as well as all Strategy products and services, please call 724-266-3269 or visit www.strategymilling.comor https://www.facebook.com/StrategyGoldMilling







Root Canal Awareness Week

Posted on Thursday, March 10, 2016

Join the American Association of Endodontists in the tenth anniversary celebration of Root Canal Awareness Week, March 27 - April 2, 2016. Root Canal Awareness Week is a national effort to raise awareness of endodontists, so that patients and general dentists know to contact a specialist when root canal treatment is needed. It is an excellent time to explain the important role endodontists play in dental health, and to teach the public that root canals should not be feared. Root Canal Awareness Week: 

SUPPORTS endodontists as root canal specialists 

EDUCATES patients about the benefits of root canal treatment 

DISPELS myths about root canal treatment 

BUILDS relationships with other dental professionals 

Download the Root Canal Awareness Week poster and logo at https://www.aae.org/rcaw/. If you're an AAE member, be sure to check out the Member Planning Guide for additional tips and information to help your practice celebrate Root Canal Awareness Week. 

Follow the AAE on Twitter @savingyourteeth!

For more information about Root Canal Awareness Week and how you can be involved, contact the AAE at at 800-872-3636 (U.S., Canada, Mexico) or 312-266-7255, or send an email to pr@aae.org.







Nobilium Announces Certified Dental Laboratory Program

Posted on Wednesday, March 9, 2016

Nobilium Announces the Nobilium Certified Dental Laboratory program

“We want to recognize many of our long-term customers who are using our products and taking advantage of our technical education” said Devon Howe, President of Nobilium.  Dental laboratories that use the high-quality Nobilium core products and participate in Nobilium continuing education are selected to be Nobilium Certified Laboratories. The company has a website that promotes the laboratories who have been selected into the program:  www.nobilium.com/ https://www.nobilium.com/nobilium-certified-laboratory







Penn Team Reverses Signs of Naturally Occurring Chronic Periodontitis

Posted on Wednesday, March 9, 2016

Periodontitis, a gum disease present in nearly half of all adults in the United States, involves inflammation, bleeding and bone loss. In its severe form, it is associated with systemic inflammatory conditions such as atherosclerosis and rheumatoid arthritis. Few treatment options exist beyond dental scaling and root planing, done in an attempt to reduce plaque and inflammation.

Now, with findings from a study led by University of Pennsylvania researchers, there is new hope that the disease can be effectively reversed.

The work, which appears in the Journal of Clinical Periodontology, employed an inhibitor of a protein called C3, a component of the body’s complement system, which is involved in immunity and inflammatory responses. Delivering this inhibitor, Cp40, to the periodontal tissue just once a week reversed naturally occurring chronic periodontitis inflammation in a preclinical model.

George Hajishengallis, Thomas W. Evans Centennial Professor in Penn’s School of Dental Medicine’sDepartment of Microbiology, and John D. Lambris, Dr. Ralph and Sallie Weaver Professor of Research Medicine in the Perelman School of Medicine’s Department of Pathology and Laboratory Medicine, were co-senior authors on the study, the result of years of collaboration.

“Even after one treatment, you could see a big difference in inflammation,” said Hajishengallis. “After six weeks, we saw reversals in inflammation, both clinically and by looking at cellular and molecular measures of osteoclast formation and inflammatory cytokines.”

“The results were so clean, so impressive,” Lambris said. “The next step is to pursue Phase 1 trials in humans.”

In addition to Hajishengallis and Lambris, the research team included lead author Tomoki Maekawa, Tetsuhiro Kajikawa and Evlambia Hajishengallis of Penn Dental Medicine; Sophia Koutsogiannaki andDaniel Ricklin of Penn Medicine; Ruel A. Briones and Cristina A. G. Garcia of Manila Central Universityand Ranillo R. G. Resuello and Joel V. Tuplano of the Simian Conservation Breeding and Research Center.

This study builds on earlier work by Hajishengallis, Lambris and colleagues which identified C3 as a promising target for treating periodontal disease. C3, or the third component of the complement system, is a key part of signaling cascades that trigger inflammation and activate the innate immune system. Their previous research, which used an inducible model of periodontal disease, found that Cp40 could reduce signs of the disease.

To get closer to a natural scenario, however, the current work was conducted on animals that naturally had developed chronic periodontitis. Initially the research team tried administering Cp40 three times a week, but after seeing significant reductions in inflammation, they tried giving it only once a week to a different group and saw the same good results.

“Statistically, giving the drug only once a week was indistinguishable from three times a week,” Hajishengallis said.

This study delivered the drug via a local injection to avoid any potential systemic effects from inhibiting a component of the immune system. There were no adverse effects reported.

“Some people have been concerned that blocking complement would lead to more infections but that is not the case here,” Lambris said. “We’re stopping the inflammation in the gums and thereby killing the bacteria that need inflammatory tissue breakdown proteins to survive.”

The researchers are even more encouraged that this treatment worked well as a stand-alone therapy; in humans, they said, it would be given in addition to the standard of care scaling and planing. They are planning to pursue a Phase 1 safety and efficacy study in human volunteers.

The study was supported by grants from the National Institutes of Health and the European Commission.

Source: University of Pennsylvania







Core3daCADemy® Holds Hands-On

Posted on Wednesday, March 9, 2016

Core3daCADemy® Holds Hands-On Course in Toronto, ON

Core3daCADemy®, the educational arm of Core3dcentres®, held its most recent Hands-on "Accuracy and Efficiencies in 3Shape" Course March 4-5, 2016 in Toronto, ON. Designed by dental technicians for dental technicians, participants gained a comprehensive understanding of the digital dental workflow (including the current state of intraoral scanning) as well as the variety of leading edge materials and how they will impact the dental laboratory over the two days. 

As with all aCADemy courses, the "Accuracy and Efficiencies in 3Shape" Course featured a smaller class size ensuring a dedicated hands-on one-to-one training experience under the guidance of Jason Atwood, Senior Digital Solutions Advisor Core3dcentres NA. Based on well over a decade of experience working with a wide variety of different CAD/CAM systems (including Cercon®, 3M™ Dental, exocad, Sirona, Dental Wings, NobelProcera, and many others) in a high production lab environment, Jason estimates that he has completed over sixty thousand digital restorations in his career. This allowed him to provide instant feedback and share practical tips and tricks based on his years spent working “on the bench” directly with doctor clients. All of this ensures that every attendee will be able to implement new and exciting skills and design efficiencies immediately on Monday morning, no matter where they were in their Digital Dental Journey.

Future sessions of “Accuracy and Efficiencies in 3Shape” are scheduled for May 20-21 in Las Vegas and November 18-19 in Calgary.

In addition, the other components of Core3daCADemy’s 3Shape series are also available in Toronto, Calgary and Las Vegas in 2016. Plan to attend “Digital Abutment and Implant Bar/Bridge Design” Course in Calgary April 15 - 16; in Toronto May 6 - 7; and in Las Vegas September 23- 24. The “Advanced Cosmetics and Customization in 3Shape” Course is available in Calgary September 16 – 17; in Toronto October 28 – 29; and in Las Vegas November 4 – 5.

For more information and Course schedules, visit www.core3dcentres.com. To Register, call toll-free 1-877-308-7717 or email InfoUSA@core3dcentres-na.com.







Antidepressants Linked to Tooth Implant Failure, New Study Finds

Posted on Tuesday, March 8, 2016

BUFFALO, N.Y. – Antidepressants, commonly used to treat anxiety, pain and other disorders, may play a role in dental implant failure, according to a new pilot study by University at Buffalo researchers.

The research found that the use of antidepressants increased the odds of implant failure by four times. Each year of antidepressant use doubled the odds of failure.

While these drugs are often used to manage mood and emotions, a side effect decreases the regulation of bone metabolism, which is crucial to the healing process.

For an implant to heal properly, new bone must form around it to secure it in place, says Sulochana Gurung, lead investigator and a doctor of dental surgery (DDS) candidate.

“Antidepressant medication may relieve depression symptoms and help millions of patients worldwide, however, their benefits must be weighed with the side effects. Patients should cooperate with their physician to reach the right balance,” says Latifa Bairam, DDS, MS, an investigator on the study and clinical assistant professor in the Department of Restorative Dentistry in the UB School of Dental Medicine.

“Four of the many known side effects that are reported in the literature are a big concern to us as dentists in regard to oral and bone health.”

Additional side effects of the drug include osteoporosis, a condition in which bones become weak and brittle; akathisia, a disorder characterized by the need to be in constant motion, including the head and jaw; bruxism, or teeth grinding; and dryness of the mouth, all of which affect the implant healing process, says Bairam.

The research, “A Pilot Study: Association between Antidepressant Use and Implant Failure,” was funded by the Student Research Program through the SDM Dean’s Vision Fund.

Gurung will present the findings at the 45th annual American Association for Dental Research conference on March 19. She also presented at the School of Dental Medicine’s 2016 Student Research Day on Feb. 25.

She completed the study under the mentorship of Bairam, Sebastiano Andreana, DDS, MS, associate professor and director of implant dentistry, and Mine Tezal, PhD, DDS, clinical assistant professor in the Department of Oral Biology.

The research began to take shape after Bairam and Andreana, who have previously studied implant failure, noticed that a growing number of their patients reported use of antidepressant medication.

After analyzing data from the medical charts of UB Dental Clinic patients in 2014, the researchers found that of the few patients who experienced implant failures, 33 percent used antidepressants. For patients who did not experience failures, only 11 percent used the drug.

“We decided that the dental community and the world should be aware of this, and that triggered the preparation of the research,” says Andreana. “The difference between 33 percent and 11 percent is quite remarkable and needs further in-depth analysis.”

More than one in 10 Americans over the age of 12 use antidepressants, making it the second most prescribed type of drug in the U.S., according to data from the Centers for Disease Control and Prevention (CDC) and IMS Health.

And the rate is increasing. Antidepressant use has surged 400 percent between the periods 1988-94 and 2005-08, according to the CDC.

The researchers plan to build on the study by retesting their results on a larger scale. For now, they advise those using antidepressants to consult with their physician about the drug’s side effects and alternative methods of managing depression, anxiety or pain.

 

 







Jensen Education Day

Posted on Tuesday, March 8, 2016

1 DAY IN CHICAGO, A YEAR’S WORTH OF EDUCATION 

Jensen Education Day 2016 

March 3, 2016 (North Haven, Conn.) - On Feb. 26, 2016 nearly 200 dental laboratory owners and technicians filled Jensen Dental’s Education Day lecture hall at the Swissôtel in Chicago and an additional 200 technicians and laboratory owners joined remotely via the streaming Live webcast. Now in its 22nd year, attendees expected to see a lineup of industry heavyweights as well as new materials and techniques and processes during hands-on demonstrations known for their interactivity. They were not disappointed. 

Renowned technicians, dentists and consultants including Peter Pizzi, MDT; Don Cornell; Dr. Brian Vence; Steve Anderson; Naoki Aiba, CDT, Adam Mieleszko, MDT; Jungo Endo, RDT; Daniele Capoferri, CDT; Luke Hasegawa, CDT; Skip Carpenter, CDT and Thomas Sing, MDT; were on hand to answer attendees’ questions as well as share the “hows and whys” behind techniques that technicians can use every day to grow their technical, artistic and business know-how.

The 22nd annual Jensen Dental Education Day stayed true to the objectives that have made it the must-attend educational event for technicians and laboratory owners during the Midwinter Meetings in Chicago. Key among those is that the knowledge attendees gain can be used to hone their technical skills, grow their capabilities and improve their laboratory. It’s not just world class technicians showing off their most amazing cases, it’s also their tips and techniques that are relevant, unique and can be implemented at any laboratory. In addition to the keynote lectures, talented technicians held intimate, focused 2 hour “master class” workshops [limited to 30 participants] during both the morning and afternoon sessions; clinicians shared full contour zirconia customizing tips, esthetic techniques, zirconia layering strategies, photography and shade taking insight and much more. 

Jensen Dental’s commitment to education and training continues beyond Education Day in Chicago. Visit Jensen Dental online at www.jensendental.com to sign up for webinars as well as to download educational tip sheets, find out where the next hands-on courses are or to enroll in one of Jensen’s virtual study clubs. 







CardConnect Merges with FinTech

Posted on Tuesday, March 8, 2016

KING OF PRUSSIA, Pa. & PHILADELPHIA - FTS Holding Corporation, the parent company ofCardConnect®, LLC, a payment processing and technology solutions provider, and FinTech Acquisition Corp. (NASDAQ: FNTC), announced today that they have entered into a definitive merger agreement, whereby FNTC will acquire CardConnect and will be renamed CardConnect Corp. The merged company will apply to continue the listing of its common stock on the Nasdaq Stock Market under the ticker symbol “CCN.” Post transaction, the CardConnect management team will continue to lead the company. CardConnect is currently majority owned by FTV Capital, a leading growth equity investor in high-growth payments and transaction processing companies.

Jeff Shanahan, President and Chief Executive officer of CardConnect commented, “We are very excited to be partnering with Betsy and FNTC in a transaction that provides an efficient path for a successful transformation to a public company. CardConnect has developed a straightforward value proposition that provides both large enterprises and smaller merchants a robust platform that optimizes security and the user experience. Our new capital structure will support our opportunistic acquisition strategy and our development of new products and technology, which will help scale the business.”Betsy Z. Cohen, Chairman of the Board of Directors of FNTC, said, “CardConnect is a profitable, growing business that has attracted an impressive blue chip customer base. CEO Jeff Shanahan and his proven team have continued to leverage technology to deliver innovative, state-of-the-art payments capabilities featuring advanced transaction security and outstanding customer service. With numerous Fortune 500 companies as well as over 60,000 small and mid-sized merchants already on its platform, CardConnect is well positioned to continue its growth by consistently meeting the demanding challenges of today’s rapidly evolving payments industry.”

Chris Winship, FTV Capital Partner said, “We have been consistently impressed with the way Jeff and his team have executed within the complex payments landscape to build one of the most successful payments platforms in the U.S. We look forward to our continuing role with CardConnect as the company enters this exciting next phase of growth.”

Once the transaction is closed, CardConnect will continue to be led by: Jeff Shanahan, President and Chief Executive Officer; Chuck Bernicker, Chief Financial Officer; Patrick Shanahan, Chief Operating Officer; Rob Nathan, Executive Vice President, Product; Rush Taggart, Chief Security Officer; Scott Dowty, Chief Sales Officer; and Angelo Greco, Executive Vice President.

Along with FNTC Chairman Betsy Z. Cohen, Richard Garman, FTV Capital Managing Partner, and Chris Winship, FTV Capital Partner, will serve on the CardConnect Board of Directors. Messrs. Garman and Winship have served on the CardConnect Board since 2010 when FTV Capital initially invested in the company.

CardConnect Highlights

  • CardConnect offers unique, full service payments platforms for both small and midsize business (“SMBs”) and enterprises through a comprehensive product portfolio, including:

    • CardPointe® - an innovative payments platform offering SMBs a convenient, centralized system to track, manage and process their payments

    • CardSecure® - a secure gateway that integrates with enterprise level Oracle and SAP ERP systems, securing every transaction through data breach protection and PCI scope reduction

  • PCI validated point-to-point encryption (P2PE) solutions

  • Prestigious client list including Adobe, AmeriGas, Dow Chemical, and General Electric

  • A patented tokenization engine, a robust solution to the industry’s increasing security sensitivity, the foremost concern with electronic payments among merchants, enterprises and consumers alike

  • Growth of 552% in gateway merchants and 57% in new merchant production in 2015

  • A 68% increase in 2015 enterprise revenue, primarily due to the introduction of a proprietary gateway

  • A 14% increase in SMB processing volume and an 11% increase in SMB net revenue in 2015

Additional information about CardConnect’s operations and financial performance is contained in the investor presentation furnished by FNTC via a Current Report on Form 8-K (the “Investor Presentation”) today with the Securities and Exchange Commission, and which can be viewed at the SEC website at www.sec.gov or on the Company’s website cardconnect.com.







Recent Headlines

© 2024 Conexiant | Privacy Policy